Implementing a New Product Landing Page Tutorial

In this tutorial, we'll build a new block to handle the display of an individual product and its interactions with the shopping cart. This could be an SEO landing page, a page you want to drive ad traffic to, or a replacement for the Product Details block with more capabilities.

Quick Start

If you have built a block before, you can skip down to Get a Product Based on the Slug in the Page Path after running this command from the directory where you keep your blocks:

element new Productlanding && cd Productlanding && npm install && npm start

Prerequisites

Before you get started, you need to ensure that your development environment is ready for you to explore Site Designer and create your own blocks.

An Account with Approval to Create Blocks

The first thing you need is for your Volusion account to be part of an approved organization that can create blocks in the Element ecosystem. To do this, see "How to Get Approved to Develop Blocks."

Setting up Your Development Environment

You also need to set up your environment with Node.js, Git, and Element CLI. For specific step-by-step instructions, see "Environment Setup."

Create the Product Landing Block

If your development environment is set up, you're ready to begin the tutorial. Start by creating a product landing block, using your terminal and your favorite text editor or IDE.

1. Log in to Element CLI

Open up your terminal and navigate to a good working directory where you'd like to keep your block code. For this tutorial, we will assume you are in a directory called "blocks."

First, log in to Element CLI to ensure that your identity is associated with the block you're about to create. Enter this command into your terminal:

element login

Element CLI will first prompt you for your username, followed by your password. Use your Volusion credentials for this.

If you're successful, you should see output like this:

blocks $ element login
? Enter your username your.name@example.com
? Enter your password [hidden]
Logged in as your.name@example.com.

2. Make a New Block with Element CLI

After your login is successful, enter this command into your terminal to create the new block:

element new Productlanding

You should see output that looks like this:

blocks $ element new Productlanding
Cloning boilerplate for Productlanding...
Saved boilerplate to ./Productlanding; now updating...
Updated files Productlanding/local/index.js!

A new directory was created called Productlanding. Enter this command in your terminal to navigate into the Productlanding directory:

cd Productlanding
git init
git commit -am "Initial commit"

Type this command into your terminal to install the npm packages that your block needs:

npm install

3. Start up the Product Landing Block for Local Development

Type this command into your terminal to run the block locally:

npm start

You should notice a browser tab open up with the URL set to http://localhost:4000/. The browser contents should look something like this:

Starter Block contents in browser

Congratulations! Your block is running locally and is ready for some changes. If this process did not start up a browser tab for you automatically, open a browser tab to http://localhost:4000/.

4. Open the Files of the Productlanding Directory in Your Text Editor

Use your favorite text editor or IDE to open the files of the Productlanding directory and take a look around. Notice the /src directory: this is where the code for your block lives.

5. Get a Product Based on the Slug in the Page Path

You're going to use a pageVar to get the product slug from the page's URL. The first step for doing this is registering the pageVar in your block's config.

'src/configs.js'

Open src/configs.js in your text editor and replace the entire code with this:

import { ElementPropTypes } from '@volusion/element-proptypes'
export const configSchema = {}
export const defaultConfig = {
productSlug: 'pageVar:pageUrlText',
}

'src/getDataProps.js'

Your getDataProps function needs to fetch the matching product.

Open src/getDataProps.js and replace the entire source code with this:

export const getDataProps = (utils, { productSlug }) => {
const { client, isRendering } = utils
if (isRendering || productSlug !== 'pageVar:pageUrlText') {
return client.products.getBySlug(productSlug).catch(() => {})
} else {
return client.products
.search({ query: '', pageSize: 1 })
.then(data => data.items[0])
}
}

Note: the second argument to getDataProps() is the block's props, which are destructured in place.

'local/index.js'

You will now set up your block so that it can simulate being inside of a theme and get real data. It's always faster when you can develop something locally.

The first step is to find your Tenant ID. From Site Designer, click on the View store button. View source and search for "tenant". There are several instances; you might find something like this:

window.ElementSdk.client.configure({tenant: "586aa7bc3e140400156259a5"

Back in your IDE, open local/index.js and find this line:

const tenantId = '$YOUR_TENANT_ID'

Update it with your tenant from the browser source:

const tenantId = '586aa7bc3e140400156259a5'

Next, you'll find a product slug and pass it to the local preview of your block. Back in your browser, find a product in your store and grab the slug from the URL (the text after /p/); for example, ...com/p/water-bottle.

Back in local/index.js, find where props are defined:

const props = {
...blockModule.defaultConfig,
text: 'Custom prop value for local testing',
}

Replace the text prop with productSlug and the value from the browser:

const props = {
...blockModule.defaultConfig,
productSlug: 'water-bottle',
}

'src/Block.js'

Your block's code needs to show the content of the product that it received from its data.

Open src/Block.js and replace return <h1>{props.text}</h1>; with this:

const product = props.data
if (!product.id) {
return <h1>Product Landing Block</h1>
}
return <h1>{product.name}</h1>

Block Testing Spec

For now, you'll want to skip the tests. Open __test__/Block.spec.js, and put a ".skip" after the first describe.

describe.skip('The Starter Block', () => {

6. Look at Your Block in the Browser

Run npm start in your terminal, then switch back to your browser window. Your block should look something like this:

Local Product Landing Block

Troubleshooting

If the browser window is blank, then you'll have to do some debugging. Open up your developer console and see if there's a helpful error message. If your block says "Product Landing Block," then there was a problem getting your product data. Look to see if you have any network errors, and double check the Tenant ID and productSlug you have set in local/index.js. There may not even be any errors, just a GET request to /store/products with an empty items array in the response.

If none of that helps, review the steps above again.

7. Publish the Product Landing Block

The product landing block is done for now, so it's time to publish it. Go to your terminal window and terminate the local server by pressing the q key, or by pressing CTRL + C.

Run this command in your terminal to build the block:

npm run build

You should see output that looks like this:

Test and build output for npm run build

Next, you need to publish the block to the Block Theme Registry. Run this command in your terminal to do so:

element publish -n "Product Landing Tutorial Block"
git commit -am "First release"
git tag 1.0

This will present you with a category selection menu that looks like this:

Select Category menu

Select the Products option and press enter. You will see output that looks like this:

Block published successfully

Note for later about the "No image" warning: you can find details on the thumbnail.png image requirements in "Element CLI.")

Create a New Theme

Now that you've published your block, the next thing you'll want to do is create a new theme to work with. You will make a page inside this theme and put your block into that page, but first you need a theme as an isolated workspace. Themes are the parent construct to pages.

1. Open Site Designer

In the web browser of your choice, sign in to Volusion.com with your approved developer account, and click the Site Designer link in the sidebar navigation:

Site Designer Link

2. Create a New Theme

Click the Create new theme link in Site Designer.

Note: If Site Designer directed you straight to your active theme, first click Change Theme near the top of the screen (next to your theme name).

Create New Theme Link

This will launch a dialog for you to enter your theme name:

Create New Theme Dialog

Enter "Product Landing Test Theme" as the name for your theme, then click the Create button.

Add a New Page for Your Product Landing Block

You now need to create a page for your product landing block.

Page Selection dropdown

Click the Add a Page link, which will open a panel in the sidebar:

Add a Page Panel

Fill out the first two fields:

  1. Page Title: Product Landing
  2. Page Path: /product/:pageUrlText

Note 1: Make sure you have a / character at the start of /product/:pageUrlText. Notice also that the :pageUrlText matches the variable name you used earlier in the product landing configs.

Note 2: If you decide to use this page to replace the Product Details, you must use the path /p/:pageUrlText or unexpected breaks may occur, such as the sitemap.

Leave the rest of the fields blank, then click the Done button at the bottom of the panel.

Site Designer will redirect you to your new Product Landing page.

Add the Product Landing Block to Its Page

Click the Add Block link:

Add Block

This will open the "Add a Block" panel, where you can select from block categories. Click on the Misc categoryā€”you'll recall this was the category you published your blocks into earlier.

Product Blocks

Locate the "Product Landing Tutorial Block" that you published, and click the Add Block button:

Product Landing Tutorial Block

You should see your product landing block appear in the main panel of Site Designer. It should look something like this, but with the name of an arbitrary product from your store:

Product Landing Block contents

If there is an error at this point, refresh your browser window and choose Product Landing from the page drop-down again. You may also have to navigate back to editing your theme after refreshing the page.

Preview Your Page

Click the Preview button near the top of the Site Designer window:

Preview button

This will launch a new browser tab with your blog list page.

Navigate or use the search to locate a product details page. The URL will be something like:

https://e9bd448c-a462-4518-98f3-9dadb57a8d8b.myvolusion.com/p/water-bottle

Replace the /p/ with /product/ to load the product landing page. Your header will be different, but your block should look something like this (in this case, the product name was "River Tam Sticker"):

Product Landing Preview

Build an "Add to Cart" Button

Now that you know that product data is loading, you can update the block with a button to add the product to the cart.

'src/Block.js'

In src/Block.js, replace the Block function with this code. Remember, replace only that function, not the whole file.

function Block(props) {
const product = props.data
if (!product.id) {
return <h1>Product Landing Block</h1>
}
const addToCart = () => {
const productVariant = {
productId: product.id,
quantity: 1,
variantId: product.productVariants[0].id,
itemPrice: product.productVariants[0].price,
}
props.pubSub.publish(props.events.cart.addToCart, productVariant)
}
return (
<React.Fragment>
<h1>{product.name}</h1>
<button onClick={addToCart}>Add to Cart</button>
</React.Fragment>
)
}

Update the Block

Return to the terminal that's open to your Productlanding directory. Build the block, and then use Element CLI to update it.

npm run build
element update

You should see output similar to this:

Block Updated

Try It Out

Go back to the browser that's open to your product landing page and refresh it. You should see an "Add to Cart" button appear under the product name, like this:

Add to Cart Preview

Click it, and the cart panel will open with your product in it.

Support Product Variants

Product variants allow a store owner to control the price, availability, and photos associated with alternative types of the same product; for example, different sizes of a T-Shirt.

Volusion Product with Variants

You'll need to find or make a product that has variants. Go to Volusion Admin and click into the Products section. It should be accessible via an icon like this:

Products Icon

Set up variants for a product. When you're done, it might look something like this:

Variants Admin

Here is some product variants help if you need it.

'local/index.js'

Copy the "Page URL text" from your product that has variants, and make sure that it matches the productSlug assigned to const props in local/index.js.

const props = {
...blockModule.defaultConfig,
productSlug: 'water-bottle',
}

'src/Block.js'

Now, you'll need to update the block so that those variant options are displayed as drop-downs. When the shopper makes a different selection, the variant sent to the cart should change.

In src/Block.js, update the React import statement at the top of the file to include the useState hook:

import React, { useState } from 'react'

Then, in the same file, replace just the Block function with this code:

function Block(props) {
const product = props.data
if (!product.id) {
return <h1>Product Landing Block</h1>
}
const [selectedOptions, setSelectedOptions] = useState(
getInitialSelectedOptions()
)
const [selectedVariant, setSelectedVariant] = useState(
getVariantFromOptions()
)
React.useEffect(() => {
setSelectedVariant(getVariantFromOptions())
}, [selectedOptions])
function getInitialSelectedOptions() {
return product.variantOptions.map(optionCategory => {
return optionCategory.options[0]
})
}
function getVariantFromOptions() {
if (selectedOptions.length === 0) {
return product.productVariants[0]
}
return product.productVariants.find(variant => {
return !variant.variants.some((value, index) => {
return selectedOptions[index] !== value
})
})
}
function addItem() {
const productVariant = {
productId: product.id,
quantity: 1,
variantId: selectedVariant.id,
itemPrice: selectedVariant.price,
}
props.pubSub.publish(props.events.cart.addToCart, productVariant)
}
function onOptionSelected(value, index) {
const updatedSelection = [...selectedOptions]
updatedSelection[index] = value
setSelectedOptions(updatedSelection)
}
return (
<>
<h1>{product.name}</h1>
<p>
{selectedVariant ? (
<span>${selectedVariant.price}</span>
) : (
<span>Option not availble.</span>
)}
</p>
<button onClick={addItem}>Add to Cart</button>
{product.variantOptions.map((optionCategory, index) => (
<React.Fragment key={`optionCategory${index}`}>
<label> {optionCategory.name} </label>
<select onChange={e => onOptionSelected(e.target.value, index)}>
{optionCategory.options.map((option, optionIndex) => (
<option key={`option${optionIndex}`} value={option}>
{option}
</option>
))}
</select>
</React.Fragment>
))}
</>
)
}

Test It Locally

Go back to the terminal that's open to your block's directory and run this command:

npm start

It should look something like this:

Local Block with Variants

When you change the "Color" and "Size" values, you will see the price change to reflect the price of the selected variant. Do not press "Add to Cart;" pubSub is not supported locally, and the block needs to be loaded within a theme to have access to the cart events.

Update Your Block

Now that we're done testing locally, stop your server and run these commands in your terminal to build and update the block:

npm run build
element update

Preview the Block

Copy the "Page URL text" from your product that has variants, and go back to the browser with the /products/ page preview, replacing the product slug in the URL. It should look something like this:

https://7c5f30cd-1dca-4c06-a888-1d017fb18148.volusionplatformdev.com/product/water-bottle

The page will look something like this:

Preview with Variants

Now you will be able to choose a different variant and add it to your cart.

Production Quality Code & Features

What you've created here is the most basic functional version of a Product blockā€”it could use some styling. Beyond that, here are some features and code improvements that you should consider before using this block in a store:

  1. Hidden variants will show the message "Option not available.", but they will throw an error if you try to add them to the cart. It would be wise to disable the "Add to Cart" button if selectedVariant is undefined.
  2. You may wish to add form controls that allow the user to change the quantity of the item in the cart using props.events.cart.updateCartCount.
  3. Utility functions such as getVariantFromOptions should be pulled out into a service where they would be easier to cover with unit tests. The tests would also serve the dual purpose of documenting the function.
  4. You should rename the Block component to something else, maybe ProductLanding? We're using the default export, so the name change will be limited to src/Block.js.
  5. The component in src/Block.js is about ready to be split up into smaller components. You could move the code that displays the select menus, starting with product.variantOptions.map, to a new component.
  6. If you log the product and selectedVariant (see below) and update the block, you may see they have data that this component is not using yet. One piece that you probably want to display is the images. You should also know that Product Variants have images too, and you may decide to change which image is visible when a shopper chooses a variant that has images. (see Images for Variants)
React.useEffect(() => {
console.log({ product, selectedVariant })
}, [selectedVariant])

Further Reading